1. Connect a bind plug to the receiver. （跟接收机绑定连接）
2. Switch on the power to the receiver, the green receiver LED will now flash. （打开接收机开关，接收机上的绿灯闪）
3. Now pick up the transmitter, before you switch it on please ensure that the throttle is in the lowest position and that all the trims are in the middle position. （拿起发射机，在打开发射机开关前，确保油门微调在最低位置，其他微调在中间位置）
4. Holding the bind switch in the up position now switch on the transmitter.
（保持绑定开关在上面的位置，现在打开发射机开关）
5. The transmitter green LED will start flashing and the receiver LED will have gone off. （发射机绿灯开始闪，然后接收机的灯停止闪动）
6. Release the bind switch on the transmitter. （断开发射机上的绑定键）
7.Remove the bind plug on the receiver ,the Green LED will now illuminate on the receiver and will now be bound to the transmitter. （移动接收机上的绑定开关，接收机上的绿灯现在会亮起来，就代表已经绑定好）
8. Finally confirm that you have now have full control over all surfaces and controls.
内容全部来源于网络收集，如有侵权，请联系网站删除：QQ号：24596024